
Lenders and buyers rarely take a single annual figure at face value, so the practical answer to what is LTM EBITDA is simple: it is earnings before interest, taxes, depreciation and amortization, added up over the most recent twelve months of operations. The window rolls forward each time a month closes.
Start with the mechanics. LTM stands for last twelve months, and you will also see it written as trailing twelve months or TTM. To build it, you take the monthly EBITDA for the twelve most recent closed months and add them together. When a new month closes, the newest month enters the total and the oldest month drops out. Nothing else in the formula changes.
In a hypothetical example, a company has just closed a month that produced $80,000 of EBITDA. The month it replaces, from one year earlier, hire outsourced CFO in Miami produced $65,000. The trailing total rises by $15,000 in that step. The owner did not necessarily find more profit that month. The window simply swapped one month for another, and the figure a lender sees reflects that swap.
This is why the closing date matters. A window is only as current as the last close. If bookkeeping runs three weeks behind, the figure a lender sees is three weeks stale, and an adjustment posted late can shift the total without anyone noticing at the time. Owners often check the bank balance every day but see EBITDA only once a month, so the lag can feel invisible until someone asks for a current number.
The window also needs a clear start and end. Some companies label it by the month that closes it, for example the twelve months ended June 30. Others anchor it to a quarter end. Either approach can work, as long as the same convention appears in the model, the lender package and the monthly reports. A mismatch between two documents is one of the fastest ways to lose a reader's trust, even when the underlying numbers are sound.
A reasonable first step is to rebuild the last twelve closed months from the general ledger, not from a summary someone pasted into a spreadsheet months ago. It takes time, but it shows whether the monthly numbers tie to the books. If they do not tie, you have found the real problem before a lender does, which is a far better position to be in.
Finally, watch for missing months. A window that skips a month because the books were not closed can look smooth while hiding a gap. Check that twelve consecutive closes exist and that each one is final rather than estimated. A single estimate buried in the middle of the window can change how every later comparison reads.
Lenders want to know what the business earns now, and the last fiscal year answers a question about the past. A company whose fiscal year closed nine months ago may have changed prices, lost a major account or opened a second location since then. The trailing window captures those changes sooner, which is why it is often the first figure an underwriter opens when reviewing a request.
Covenants turn the number from a snapshot into a recurring test. Many loan agreements set a minimum debt service coverage ratio or a maximum leverage ratio, and the test is usually run on trailing figures at each reporting date. Because the test repeats, a company can pass one quarter and fall short the next, even when the business itself looks steady from the inside.
It depends on the type of loan. A revolving line secured by receivables may focus on the borrowing base and aging reports, while a term loan for equipment may care more about cash flow available for debt payments. Ask the lender which figure drives the covenant before you build your model. The definitions in the credit agreement control the math, not your spreadsheet.
Definitions are where many surprises begin. The agreement may define EBITDA with specific add-backs, exclude certain non-cash charges or require adjustments only from a particular date. Read the definition section line by line, or have your accountant or CFO do it with you. A figure that looks right in a memo can fail the covenant test once the agreement's definition is applied to the same records.
Lenders also look at the trend across several windows, not only the latest one. A rising trailing figure built on steady monthly results tells a different story than a figure lifted by one unusually strong month. Expect questions about seasonality and one-off items, and have the monthly bridge ready so you can answer them without scrambling for documents during the call.
A short note on how the business plan connects to the historical window can also help. A trailing figure that is improving supports a forward projection. A projection that depends on a sharp break from recent results needs its own explanation. Keep the two documents consistent with each other, so the lender does not have to reconcile them on their own.
Raw EBITDA often needs adjustments before it means much to anyone outside the company. Lenders and buyers usually expect an add-back schedule that separates recurring operating results from items that will not repeat, such as a legal settlement, a one-time equipment write-off or a storm-related loss. The schedule should show each item, its amount and the source document that supports it.
Owner compensation is a common example, and it is also where judgment matters most. If the owner takes an unusually low salary, the company may need an adjustment to show what a market-rate manager would cost. If family members are on the payroll for reasons unrelated to work, that is a different conversation. Neither case is automatically wrong, but each needs a clear rationale that a reader can check.
Be cautious with add-backs that recur every year. A cost that appears in three consecutive trailing windows and keeps getting labeled as one-time will draw attention. Readers usually respect a short list of defensible items more than a long list of creative ones. If an item keeps coming back, it probably belongs in operating costs, and treating it as an add-back will weaken the rest of the schedule.
Revenue timing can also move the figure. Under ASC 606, the revenue recognition standard used in U.S. GAAP, a company recognizes revenue when it transfers control of goods or services, which can differ from when cash arrives. A business with long projects, customer deposits or subscriptions may see the trailing window change because of timing rather than because customers changed their behavior. Note that difference in your bridge so the reader does not mistake timing for performance.
Government relief can add its own complications. Programs such as the Paycheck Protection Program created income or forgiveness events that needed separate treatment, and the accounting depended on the specific guidance and the period involved. If your trailing window includes an event like that, label it clearly and confirm the treatment with your accountant rather than relying on memory or on how a similar company handled it.
A short explanation for each adjustment helps more than a long one. Two sentences per item, with the source document named, usually do the job. If an adjustment needs a full paragraph to defend, consider whether the reader will accept it at all. In that case, it may be more honest to leave it out and explain the situation in plain words.
The three measures answer different questions, so comparing them side by side helps. LTM EBITDA looks back over the latest closed months. Fiscal-year EBITDA covers one annual period that may be older. Run-rate EBITDA takes a recent month or quarter and projects it forward as if it would repeat. Each one is useful, and each carries a different risk of overstating or understating the business.
Read the table as a checklist rather than a ranking. For a lender, LTM usually carries the most weight because it is built from closed books rather than projections. For a buyer negotiating price, run-rate figures often enter the conversation, and the buyer will test whether the recent months are real and repeatable. Neither measure replaces the others, and each one answers a different part of the reader's question.
It depends on the purpose of the conversation. If you are preparing a loan request, lead with LTM and keep the fiscal-year figure as context. If you are preparing for a sale, be ready to explain why run-rate differs from LTM, since buyers often ask for both. Choose the measure that matches the question, and state which one you used so the reader does not have to guess.
Consistency matters more than the choice itself. Changing the definition from one report to the next makes the business look as if it moved when only the method changed. Keep a written definition, apply it the same way every month, and note any change together with its effect on the number. A reader who sees a clear note will trust the next figure more, not less.
Note also that a measure can look good in one window and poor in another. Showing two or three windows side by side tells the reader more than any single figure, especially when the reader can see how the totals moved and why. Keep the comparison simple enough to read in a few minutes.
Seasonal businesses in Miami and South Florida face a particular problem with the trailing window. A hotel, restaurant group, tour operator or seasonal retailer may earn most of its profit in a few months, so the twelve-month total changes depending on where the window starts. The same business can look stronger or weaker by simply moving the end date, even when nothing about its operations has changed.
Hurricane season adds another layer for some companies. Storms can close locations, delay deliveries or shift customer demand for weeks, and an insurance recovery may land in a different month than the loss itself. Construction and real estate firms can see the same timing gap when projects slip from one quarter into the next. Document these events as they happen, with dates and amounts, so the trailing figure can be explained later without reconstructing the story.
Tourism-driven businesses often find that their busiest season begins before the window they want to show. In a hypothetical example, a boat rental company in Miami has a strong winter and a slow late summer. A lender that receives a window ending in May may see a healthy twelve-month total, while a window ending in October may show a weaker one. Neither figure is wrong, but the lender needs the monthly pattern to judge the business fairly.
Trade businesses with project-based revenue face a related issue. Revenue recognized as work is completed, customer deposits held for materials and change orders can all move the trailing figure. A contractor who collects a large deposit in one month may look more profitable for a few months, then less so once the work is performed and the cost follows. The bridge should show these timing items separately, so the reader can see what is durable and what is timing.
The practical fix is a monthly chart of EBITDA next to the trailing figure, with notes on what drove the peaks and valleys. You do not need a complex model to start. A simple chart that a lender can read in two minutes often does more good than a detailed workbook that nobody has time to review. Plan the reporting calendar around the peak season as well. If the busiest months close late, the trailing figure may lag exactly when the lender wants to see it, so agree on a reporting date that works for both sides before the season starts.
When a sale or a capital raise becomes serious, the buyer or investor will rebuild the trailing figure from source records. They will ask for general ledger detail, bank statements, invoices and payroll reports, and they will compare the totals with the figure you presented. Discrepancies at this stage slow the process and can change the price or the terms, even when the gap is small and easy to explain.
Quality of earnings reviews are common in larger transactions. An outside accounting firm examines the trailing period, tests the add-backs, checks revenue cutoff and looks for costs that were pushed out of the window. Smaller deals may skip a formal review, but the buyer's advisor will still ask most of the same questions, usually with less patience for documents that arrive late.
Consider how a buyer might read a strong trailing figure. If most of the twelve-month profit came from one customer, the buyer will ask what happens if that customer leaves. If margins jumped in the last two months, the buyer will check whether costs were deferred or invoices were recognized early. The number is the start of the conversation, not the end of it, and a strong figure with no explanation can raise more doubts than a modest one with a clear story.
Post-acquisition integration depends on the same records. If the target uses a different chart of accounts, a different close schedule or a different ERP system, the buyer's team will spend months mapping data before it can produce a clean trailing figure. Systems such as NetSuite or Sage Intacct can help standardize that data across entities, but they cannot fix a close that was never disciplined before the sale began.
It depends on how far along the process you are. If you are still deciding whether to sell, a clean trailing history gives you options and lets you test different timing without pressure. If a process has already started, a disorganized window can narrow those options quickly. In either case, the goal is the same: a figure you can walk a stranger through line by line without needing to look anything up.
Keep a organized data room from the start, even if no sale is planned. Folders for financial statements, tax returns, contracts, key customer lists and the monthly bridge cost little to maintain. When a transaction arrives suddenly, those folders can save weeks of searching and rebuilding, and they make the trailing figure easier to defend from the first conversation.
The trailing figure is only as credible as the monthly close behind it. A close is the routine where bank accounts are reconciled, accruals are posted, the books are checked and the month's reports are reviewed before anyone relies on them. Many small companies skip steps when they are busy, and the trailing window is where those skipped steps show up later, often at the worst possible moment.
Internal controls do not need to be heavy to be useful. Separate the people who approve payments from those who record them, reconcile bank and credit card accounts every month, and require someone other than the preparer to review large or unusual entries. These steps catch errors early and make the audit trail easier to follow when a lender or investor asks questions about a specific month.
Tools matter, but they are not a substitute for discipline. QuickBooks suits many growing companies in the early stage, while NetSuite and Sage Intacct are often considered when a business needs multiple entities, more detailed reporting or heavier inventory and project accounting. Switching systems in the middle of a window can break comparability, so plan any migration around a clean cutoff date and keep the old records accessible.
Audit preparation follows the same logic. If an audit or review is expected, the trailing period should already have supporting schedules for revenue, deferred revenue, accrued liabilities and fixed assets. Waiting until the auditor asks for them usually costs more time and creates pressure to explain gaps that could have been documented at the time, when the details were still fresh.
Hire Outsourced CFO In Miami accounting can keep this routine steady during staff changes. A bookkeeper who leaves, a controller on leave or a seasonal spike in transactions can all disrupt the close. Continuity depends on written procedures, a shared calendar and access to the records, so that another qualified person can pick up the work without rebuilding it from scratch.
Document the close checklist and assign an owner to each step. When the checklist lives in one place, a new staff member or an outside accountant can follow it without guessing which reconciliations matter most. The checklist also gives you a simple way to show a lender that the trailing figure came from a repeatable process rather than from one person's memory.
Before you send a lender or investor the trailing figure, decide who owns the number. In some businesses the owner signs off on it. In others, a controller, a fractional CFO or an outside accountant prepares it and the owner reviews it. Whoever signs should be able to explain every add-back and every timing item without reading from a script or deferring to a spreadsheet nobody else understands.
It depends on what you are trying to show. A bank that wants a term loan may look for debt service coverage. An investor may focus on growth and margin trends. A buyer may focus on normalized earnings after adjustments. Ask the reader which measure they will use and which definition applies, and get the answer in writing so there is no disagreement later about which version of the figure was requested.
Then confirm the basics with your accountant or CFO before you hand over anything. Use this checklist as a starting point rather than a script:

Ask about the process, not only the answer. How quickly does the close finish each month? Who reviews the add-backs? What happens if a figure has to be restated after you have already sent it? A professional who can describe these steps clearly gives you more confidence than one who promises a particular outcome, because no one can guarantee how a lender, investor or buyer will judge the business.
Finally, decide when to revisit the number. A trailing window is a snapshot that ages each month, so a figure prepared for one meeting may be out of date for the next. Set a simple routine for refreshing it, keep the bridge with it and date every version you share. That way the next conversation starts from the same clear facts instead of from a memory of the last one.
| Phone | 887407008 |
| Email Address | pam_strangways@fastcut.top |
| Gender | Male |
| Salary | 18 - 57 |
| Address | 5710 |